Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
支持1路RS485接口，可连接DCS/PLC
支持以太网、4G、光纤、Zigbee等多种通讯方式
支持断网数据存储，联网后自动补传
灵活的数据采集策略配置，适应不同设备工况
防护等级：IP66
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±10g
灵敏度：500mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
低频响应优秀
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
连接器侧出，可用于空间较小的位置
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：3.15～16kHz±2dB
灵敏度： 40mV(-28dB)±2dB
工作温度：-10℃~+80℃
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求
耐腐蚀，可用于环境恶劣的工业现场
Operating Temperature: -40℃~+80°C Large strain measurement range Built-in temperature compensation Resistant to electromagnetic interference Electrowelded packaging for long-lasting durability
Measuring range: ±50g
Temperature measuring range: -50℃~ +150℃
IP level: IP67
Ultra-low power consumption with an ultra-long 19AH battery life.
Fall arrester, adaptable to harsh installation environments.
量程：±50g
测温量程：-50～+150℃
防护等级：IP67
超低功耗设计，19AH超长续航
振温一体，高频响
防坠落装置，适应恶劣安装环境
Adopt CuZn39Pb3, the working pressure is not less than 15Mpa . The hydraulic strength test is carried out at 1.5 times the working pressure kept for 5 minutes without deformation or leakage. The gas tightness test is carried out under 1.1 times the working pressure. When the valve is closed, there is no bubble leakage; when the valve is open, the leakage amount of bubbles in each connection sealing part should not exceed 20 / min. The salt spray corrosion test shows that there is no obvious corrosion damage in each part of the container valve and no performance decline. The safety release diaphragm of the container will burst at 1.25 (±0.0625) times maximum working pressure. The operation of the container valve is flexible, reliable, and not prone to any failure and structural damage.
Measuring range: ±50g Temperature measuring range: -50℃~ +150℃ IP67 Vibration-temperature integration, high-frequency Ultra-low power design, long endurance
Explosion-proof mark: Ex ib I Mb RS485 interface able to connect to DCS/PLC Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. Data storage during network outages, and automatic data upload upon reconnection IP66
Explosion-proof mark: Ex ib I Mb Modular design, 8-channel IEPE acceleration input for data acquisition ADC acquisition, 8-channel fully synchronized sampling Four-channel speed input, supports speed-related data acquisition Two-channel RS485 interfaces able to connect to DCS/PLC Self-diagnostic function, automatically detecting short circuits and open circuits
Vibaration and temperature integrated Explosion-proof mark: Ex ib I Mb Range: ±50g Temperature measurement range: -50°C to +150°C Integrated vibration and temperature sensor, high-frequency response IP67
Explosion-proof mark: Ex ib I Mb Speed measurement range: 0~3000 r/min Rated supply voltage: DC 12V Output signal: 1 channel, (0~6000) Hz pulse signal IP54 Corrosion-resistant housing, suitable in harsh industrial environments
Explosion-proof mark: Ex ib I Mb Built-in IEPE circuit, isolated output, constant current source power supply Laser sealing welding, solid and reliable Suitable in harsh industrial environments Equipped with temperature and vibration monitoring functions IP68
Steel seamless cylinders that complt with the GB5099-1994 standard. The maximum working pressure of the cylinder is 15 MPa. When subjected to a hydraulic strength test at 1.5 times the working pressure for 3 minutes, there is no leakage or significant residual deformation. When subjected to a hydraulic strength test at 1.1 times the working pressure, the container should have no bubble leakage. When subjected to a hydraulic strength test at 3 times the working pressure, the container shows no signs of rupture.
Dimension: 115×136×53mm Volume: 100 decibels Power supply: 9V carbon-zinc battery Battery replacement cycle: 3 months (in standby mode) Signal port I/O: (Input/Output)
Outer diameter: φ8mm Inner diameter: φ4mm No brittleness or cracking at an -20℃, and no softening or deformation at 55℃ Not activate when maintained at 140℃ ± 2℃ for 2 minutes Activate within 20 seconds at 167℃ ± 8℃ The working pressure should not be less than 1.0 MPa
Power supply: DC10-28V Overall power consumption: ≤1W Lightning orotection capability: Imax (8/20us) 100KA Installation options: rail and bolt mounting Advanced electromagnetic compatibility design for ultra-low radiation Human-Machine Interface for monitoring, fault indication, and historical information inquiry Storing over 100 SPD historical alarm records and 500 lightning event records RS485 communication, easy to connect to monitoring center
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
支持1路RS485接口，可连接DCS/PLC
支持以太网、4G、光纤、Zigbee等多种通讯方式
支持断网数据存储，联网后自动补传
灵活的数据采集策略配置，适应不同设备工况
防护等级：IP66
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±10g
灵敏度：500mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
低频响应优秀
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
连接器侧出，可用于空间较小的位置
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：3.15～16kHz±2dB
灵敏度： 40mV(-28dB)±2dB
工作温度：-10℃~+80℃
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求
耐腐蚀，可用于环境恶劣的工业现场
Operating Temperature: -40℃~+80°C Large strain measurement range Built-in temperature compensation Resistant to electromagnetic interference Electrowelded packaging for long-lasting durability
Measuring range: ±50g
Temperature measuring range: -50℃~ +150℃
IP level: IP67
Ultra-low power consumption with an ultra-long 19AH battery life.
Fall arrester, adaptable to harsh installation environments.
量程：±50g
测温量程：-50～+150℃
防护等级：IP67
超低功耗设计，19AH超长续航
振温一体，高频响
防坠落装置，适应恶劣安装环境
Adopt CuZn39Pb3, the working pressure is not less than 15Mpa . The hydraulic strength test is carried out at 1.5 times the working pressure kept for 5 minutes without deformation or leakage. The gas tightness test is carried out under 1.1 times the working pressure. When the valve is closed, there is no bubble leakage; when the valve is open, the leakage amount of bubbles in each connection sealing part should not exceed 20 / min. The salt spray corrosion test shows that there is no obvious corrosion damage in each part of the container valve and no performance decline. The safety release diaphragm of the container will burst at 1.25 (±0.0625) times maximum working pressure. The operation of the container valve is flexible, reliable, and not prone to any failure and structural damage.
Measuring range: ±50g Temperature measuring range: -50℃~ +150℃ IP67 Vibration-temperature integration, high-frequency Ultra-low power design, long endurance
Explosion-proof mark: Ex ib I Mb RS485 interface able to connect to DCS/PLC Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. Data storage during network outages, and automatic data upload upon reconnection IP66
Explosion-proof mark: Ex ib I Mb Modular design, 8-channel IEPE acceleration input for data acquisition ADC acquisition, 8-channel fully synchronized sampling Four-channel speed input, supports speed-related data acquisition Two-channel RS485 interfaces able to connect to DCS/PLC Self-diagnostic function, automatically detecting short circuits and open circuits
Vibaration and temperature integrated Explosion-proof mark: Ex ib I Mb Range: ±50g Temperature measurement range: -50°C to +150°C Integrated vibration and temperature sensor, high-frequency response IP67
Explosion-proof mark: Ex ib I Mb Speed measurement range: 0~3000 r/min Rated supply voltage: DC 12V Output signal: 1 channel, (0~6000) Hz pulse signal IP54 Corrosion-resistant housing, suitable in harsh industrial environments
Explosion-proof mark: Ex ib I Mb Built-in IEPE circuit, isolated output, constant current source power supply Laser sealing welding, solid and reliable Suitable in harsh industrial environments Equipped with temperature and vibration monitoring functions IP68
Steel seamless cylinders that complt with the GB5099-1994 standard. The maximum working pressure of the cylinder is 15 MPa. When subjected to a hydraulic strength test at 1.5 times the working pressure for 3 minutes, there is no leakage or significant residual deformation. When subjected to a hydraulic strength test at 1.1 times the working pressure, the container should have no bubble leakage. When subjected to a hydraulic strength test at 3 times the working pressure, the container shows no signs of rupture.
Dimension: 115×136×53mm Volume: 100 decibels Power supply: 9V carbon-zinc battery Battery replacement cycle: 3 months (in standby mode) Signal port I/O: (Input/Output)
Outer diameter: φ8mm Inner diameter: φ4mm No brittleness or cracking at an -20℃, and no softening or deformation at 55℃ Not activate when maintained at 140℃ ± 2℃ for 2 minutes Activate within 20 seconds at 167℃ ± 8℃ The working pressure should not be less than 1.0 MPa
Power supply: DC10-28V Overall power consumption: ≤1W Lightning orotection capability: Imax (8/20us) 100KA Installation options: rail and bolt mounting Advanced electromagnetic compatibility design for ultra-low radiation Human-Machine Interface for monitoring, fault indication, and historical information inquiry Storing over 100 SPD historical alarm records and 500 lightning event records RS485 communication, easy to connect to monitoring center
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
支持1路RS485接口，可连接DCS/PLC
支持以太网、4G、光纤、Zigbee等多种通讯方式
支持断网数据存储，联网后自动补传
灵活的数据采集策略配置，适应不同设备工况
防护等级：IP66
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±10g
灵敏度：500mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
低频响应优秀
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
连接器侧出，可用于空间较小的位置
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：3.15～16kHz±2dB
灵敏度： 40mV(-28dB)±2dB
工作温度：-10℃~+80℃
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求
耐腐蚀，可用于环境恶劣的工业现场
Operating Temperature: -40℃~+80°C Large strain measurement range Built-in temperature compensation Resistant to electromagnetic interference Electrowelded packaging for long-lasting durability
Measuring range: ±50g
Temperature measuring range: -50℃~ +150℃
IP level: IP67
Ultra-low power consumption with an ultra-long 19AH battery life.
Fall arrester, adaptable to harsh installation environments.
量程：±50g
测温量程：-50～+150℃
防护等级：IP67
超低功耗设计，19AH超长续航
振温一体，高频响
防坠落装置，适应恶劣安装环境
Adopt CuZn39Pb3, the working pressure is not less than 15Mpa . The hydraulic strength test is carried out at 1.5 times the working pressure kept for 5 minutes without deformation or leakage. The gas tightness test is carried out under 1.1 times the working pressure. When the valve is closed, there is no bubble leakage; when the valve is open, the leakage amount of bubbles in each connection sealing part should not exceed 20 / min. The salt spray corrosion test shows that there is no obvious corrosion damage in each part of the container valve and no performance decline. The safety release diaphragm of the container will burst at 1.25 (±0.0625) times maximum working pressure. The operation of the container valve is flexible, reliable, and not prone to any failure and structural damage.
Measuring range: ±50g Temperature measuring range: -50℃~ +150℃ IP67 Vibration-temperature integration, high-frequency Ultra-low power design, long endurance
Explosion-proof mark: Ex ib I Mb RS485 interface able to connect to DCS/PLC Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. Data storage during network outages, and automatic data upload upon reconnection IP66
Explosion-proof mark: Ex ib I Mb Modular design, 8-channel IEPE acceleration input for data acquisition ADC acquisition, 8-channel fully synchronized sampling Four-channel speed input, supports speed-related data acquisition Two-channel RS485 interfaces able to connect to DCS/PLC Self-diagnostic function, automatically detecting short circuits and open circuits
Vibaration and temperature integrated Explosion-proof mark: Ex ib I Mb Range: ±50g Temperature measurement range: -50°C to +150°C Integrated vibration and temperature sensor, high-frequency response IP67
Explosion-proof mark: Ex ib I Mb Speed measurement range: 0~3000 r/min Rated supply voltage: DC 12V Output signal: 1 channel, (0~6000) Hz pulse signal IP54 Corrosion-resistant housing, suitable in harsh industrial environments
Explosion-proof mark: Ex ib I Mb Built-in IEPE circuit, isolated output, constant current source power supply Laser sealing welding, solid and reliable Suitable in harsh industrial environments Equipped with temperature and vibration monitoring functions IP68
Steel seamless cylinders that complt with the GB5099-1994 standard. The maximum working pressure of the cylinder is 15 MPa. When subjected to a hydraulic strength test at 1.5 times the working pressure for 3 minutes, there is no leakage or significant residual deformation. When subjected to a hydraulic strength test at 1.1 times the working pressure, the container should have no bubble leakage. When subjected to a hydraulic strength test at 3 times the working pressure, the container shows no signs of rupture.
Dimension: 115×136×53mm Volume: 100 decibels Power supply: 9V carbon-zinc battery Battery replacement cycle: 3 months (in standby mode) Signal port I/O: (Input/Output)
Outer diameter: φ8mm Inner diameter: φ4mm No brittleness or cracking at an -20℃, and no softening or deformation at 55℃ Not activate when maintained at 140℃ ± 2℃ for 2 minutes Activate within 20 seconds at 167℃ ± 8℃ The working pressure should not be less than 1.0 MPa
Power supply: DC10-28V Overall power consumption: ≤1W Lightning orotection capability: Imax (8/20us) 100KA Installation options: rail and bolt mounting Advanced electromagnetic compatibility design for ultra-low radiation Human-Machine Interface for monitoring, fault indication, and historical information inquiry Storing over 100 SPD historical alarm records and 500 lightning event records RS485 communication, easy to connect to monitoring center
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
支持1路RS485接口，可连接DCS/PLC
支持以太网、4G、光纤、Zigbee等多种通讯方式
支持断网数据存储，联网后自动补传
灵活的数据采集策略配置，适应不同设备工况
防护等级：IP66
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±10g
灵敏度：500mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
低频响应优秀
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
连接器侧出，可用于空间较小的位置
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：3.15～16kHz±2dB
灵敏度： 40mV(-28dB)±2dB
工作温度：-10℃~+80℃
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求
耐腐蚀，可用于环境恶劣的工业现场
Operating Temperature: -40℃~+80°C Large strain measurement range Built-in temperature compensation Resistant to electromagnetic interference Electrowelded packaging for long-lasting durability
Measuring range: ±50g
Temperature measuring range: -50℃~ +150℃
IP level: IP67
Ultra-low power consumption with an ultra-long 19AH battery life.
Fall arrester, adaptable to harsh installation environments.
量程：±50g
测温量程：-50～+150℃
防护等级：IP67
超低功耗设计，19AH超长续航
振温一体，高频响
防坠落装置，适应恶劣安装环境
Adopt CuZn39Pb3, the working pressure is not less than 15Mpa . The hydraulic strength test is carried out at 1.5 times the working pressure kept for 5 minutes without deformation or leakage. The gas tightness test is carried out under 1.1 times the working pressure. When the valve is closed, there is no bubble leakage; when the valve is open, the leakage amount of bubbles in each connection sealing part should not exceed 20 / min. The salt spray corrosion test shows that there is no obvious corrosion damage in each part of the container valve and no performance decline. The safety release diaphragm of the container will burst at 1.25 (±0.0625) times maximum working pressure. The operation of the container valve is flexible, reliable, and not prone to any failure and structural damage.
Measuring range: ±50g Temperature measuring range: -50℃~ +150℃ IP67 Vibration-temperature integration, high-frequency Ultra-low power design, long endurance
Explosion-proof mark: Ex ib I Mb RS485 interface able to connect to DCS/PLC Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. Data storage during network outages, and automatic data upload upon reconnection IP66
Explosion-proof mark: Ex ib I Mb Modular design, 8-channel IEPE acceleration input for data acquisition ADC acquisition, 8-channel fully synchronized sampling Four-channel speed input, supports speed-related data acquisition Two-channel RS485 interfaces able to connect to DCS/PLC Self-diagnostic function, automatically detecting short circuits and open circuits
Vibaration and temperature integrated Explosion-proof mark: Ex ib I Mb Range: ±50g Temperature measurement range: -50°C to +150°C Integrated vibration and temperature sensor, high-frequency response IP67
Explosion-proof mark: Ex ib I Mb Speed measurement range: 0~3000 r/min Rated supply voltage: DC 12V Output signal: 1 channel, (0~6000) Hz pulse signal IP54 Corrosion-resistant housing, suitable in harsh industrial environments
Explosion-proof mark: Ex ib I Mb Built-in IEPE circuit, isolated output, constant current source power supply Laser sealing welding, solid and reliable Suitable in harsh industrial environments Equipped with temperature and vibration monitoring functions IP68
Steel seamless cylinders that complt with the GB5099-1994 standard. The maximum working pressure of the cylinder is 15 MPa. When subjected to a hydraulic strength test at 1.5 times the working pressure for 3 minutes, there is no leakage or significant residual deformation. When subjected to a hydraulic strength test at 1.1 times the working pressure, the container should have no bubble leakage. When subjected to a hydraulic strength test at 3 times the working pressure, the container shows no signs of rupture.
Dimension: 115×136×53mm Volume: 100 decibels Power supply: 9V carbon-zinc battery Battery replacement cycle: 3 months (in standby mode) Signal port I/O: (Input/Output)
Outer diameter: φ8mm Inner diameter: φ4mm No brittleness or cracking at an -20℃, and no softening or deformation at 55℃ Not activate when maintained at 140℃ ± 2℃ for 2 minutes Activate within 20 seconds at 167℃ ± 8℃ The working pressure should not be less than 1.0 MPa
Power supply: DC10-28V Overall power consumption: ≤1W Lightning orotection capability: Imax (8/20us) 100KA Installation options: rail and bolt mounting Advanced electromagnetic compatibility design for ultra-low radiation Human-Machine Interface for monitoring, fault indication, and historical information inquiry Storing over 100 SPD historical alarm records and 500 lightning event records RS485 communication, easy to connect to monitoring center
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
Range: ±80g 
Sensitivity: 100mv/g 
Temperature Measurement Range: -40℃～+120℃ 
Built-in IEPE circuit, isolated output, constant current source power supply 支持1路RS485接口，可连接DCS/PLC
支持以太网、4G、光纤、Zigbee等多种通讯方式
支持断网数据存储，联网后自动补传
灵活的数据采集策略配置，适应不同设备工况
防护等级：IP66
支持1路RS485接口，可连接DCS/PLC 
支持以太网、4G、光纤、Zigbee等多种通讯方式 
支持断网数据存储，联网后自动补传 
灵活的数据采集策略配置，适应不同设备工况 量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g 
灵敏度：100mv/g 
测温量程：-40℃～+120℃ 
内置 IEPE 电路，隔离输出，恒流源供电 量程：±10g
灵敏度：500mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
低频响应优秀
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±10g 
灵敏度：500mv/g 
测温量程：-40℃～+120℃ 
内置 IEPE 电路，隔离输出，恒流源供电 量程：±80g
灵敏度：100mv/g
测温量程：-40℃～+120℃
内置 IEPE 电路，隔离输出，恒流源供电
激光密封焊接，牢固可靠
连接器侧出，可用于空间较小的位置
防护等级 IP68
耐腐蚀，可用于环境恶劣的工业现场
量程：±80g 灵敏度：100mv/g 测温量程：-40℃～+120℃ 内置 IEPE 电路，隔离输出，恒流源供电 量程：3.15～16kHz±2dB
灵敏度： 40mV(-28dB)±2dB
工作温度：-10℃~+80℃
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求
耐腐蚀，可用于环境恶劣的工业现场
量程：3.15～16kHz±2dB 
灵敏度： 40mV(-28dB)±2dB 
工作温度：-10℃~+80℃ 
特殊的声学设计降低自由场频率响应影响，满足IEC 61672-1的要求 Operating Temperature: -40℃~+80°C Large strain measurement range Built-in temperature compensation Resistant to electromagnetic interference Electrowelded packaging for long-lasting durability
Operating Temperature: -40℃~+80°C 
Large strain measurement range 
Built-in temperature compensation 
Resistant to electromagnetic interference Measuring range: ±50g
Temperature measuring range: -50℃~ +150℃
IP level: IP67
Ultra-low power consumption with an ultra-long 19AH battery life.
Fall arrester, adaptable to harsh installation environments.
Measuring range: ±50g 
Temperature measuring range: -50℃~ +150℃ 
IP level: IP67 
Ultra-low power consumption with an ultra-long 19AH battery life. 量程：±50g
测温量程：-50～+150℃
防护等级：IP67
超低功耗设计，19AH超长续航
振温一体，高频响
防坠落装置，适应恶劣安装环境
量程：±50g 测温量程：-50～+150℃ 防护等级：IP67 振温一体，高频响 Adopt CuZn39Pb3, the working pressure is not less than 15Mpa . The hydraulic strength test is carried out at 1.5 times the working pressure kept for 5 minutes without deformation or leakage. The gas tightness test is carried out under 1.1 times the working pressure. When the valve is closed, there is no bubble leakage; when the valve is open, the leakage amount of bubbles in each connection sealing part should not exceed 20 / min. The salt spray corrosion test shows that there is no obvious corrosion damage in each part of the container valve and no performance decline. The safety release diaphragm of the container will burst at 1.25 (±0.0625) times maximum working pressure. The operation of the container valve is flexible, reliable, and not prone to any failure and structural damage.
Measuring range: ±50g Temperature measuring range: -50℃~ +150℃ IP67 Vibration-temperature integration, high-frequency Ultra-low power design, long endurance
Measuring range: ±50g 
Temperature measuring range: -50℃~ +150℃ 
IP67 
Vibration-temperature integration, high-frequency Explosion-proof mark: Ex ib I Mb RS485 interface able to connect to DCS/PLC Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. Data storage during network outages, and automatic data upload upon reconnection IP66
Explosion-proof mark: Ex ib I Mb 
RS485 interface able to connect to DCS/PLC 
Multiple communication methods including Ethernet, fiber optic, Zigbee, etc. 
Data storage during network outages, and automatic data upload upon reconnection Explosion-proof mark: Ex ib I Mb Modular design, 8-channel IEPE acceleration input for data acquisition ADC acquisition, 8-channel fully synchronized sampling Four-channel speed input, supports speed-related data acquisition Two-channel RS485 interfaces able to connect to DCS/PLC Self-diagnostic function, automatically detecting short circuits and open circuits
Explosion-proof mark: Ex ib I Mb 
Modular design, 8-channel IEPE acceleration input for data acquisition 
ADC acquisition, 8-channel fully synchronized sampling 
Four-channel speed input, supports speed-related data acquisition Vibaration and temperature integrated Explosion-proof mark: Ex ib I Mb Range: ±50g Temperature measurement range: -50°C to +150°C Integrated vibration and temperature sensor, high-frequency response IP67
Vibaration and temperature integrated 
Explosion-proof mark: Ex ib I Mb 
Range: ±50g 
Temperature measurement range: -50°C to +150°C Explosion-proof mark: Ex ib I Mb Speed measurement range: 0~3000 r/min Rated supply voltage: DC 12V Output signal: 1 channel, (0~6000) Hz pulse signal IP54 Corrosion-resistant housing, suitable in harsh industrial environments
Explosion-proof mark: Ex ib I Mb 
Speed measurement range: 0~3000 r/min 
Rated supply voltage: DC 12V 
Output signal: 1 channel, (0~6000) Hz pulse signal Explosion-proof mark: Ex ib I Mb Built-in IEPE circuit, isolated output, constant current source power supply Laser sealing welding, solid and reliable Suitable in harsh industrial environments Equipped with temperature and vibration monitoring functions IP68
Explosion-proof mark: Ex ib I Mb 
Built-in IEPE circuit, isolated output, constant current source power supply 
Laser sealing welding, solid and reliable 
Suitable in harsh industrial environments Steel seamless cylinders that complt with the GB5099-1994 standard. The maximum working pressure of the cylinder is 15 MPa. When subjected to a hydraulic strength test at 1.5 times the working pressure for 3 minutes, there is no leakage or significant residual deformation. When subjected to a hydraulic strength test at 1.1 times the working pressure, the container should have no bubble leakage. When subjected to a hydraulic strength test at 3 times the working pressure, the container shows no signs of rupture.
Dimension: 115×136×53mm Volume: 100 decibels Power supply: 9V carbon-zinc battery Battery replacement cycle: 3 months (in standby mode) Signal port I/O: (Input/Output)
Dimension: 115×136×53mm 
Volume: 100 decibels 
Power supply: 9V carbon-zinc battery 
Battery replacement cycle: 3 months (in standby mode) Outer diameter: φ8mm Inner diameter: φ4mm No brittleness or cracking at an -20℃, and no softening or deformation at 55℃ Not activate when maintained at 140℃ ± 2℃ for 2 minutes Activate within 20 seconds at 167℃ ± 8℃ The working pressure should not be less than 1.0 MPa
Power supply: DC10-28V Overall power consumption: ≤1W Lightning orotection capability: Imax (8/20us) 100KA Installation options: rail and bolt mounting Advanced electromagnetic compatibility design for ultra-low radiation Human-Machine Interface for monitoring, fault indication, and historical information inquiry Storing over 100 SPD historical alarm records and 500 lightning event records RS485 communication, easy to connect to monitoring center
Power supply: DC10-28V 
Overall power consumption: ≤1W 
Lightning orotection capability: Imax (8/20us) 100KA 
Installation options: rail and bolt mounting Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply Solid and reliable laser sealing welding Connectors have side exit, suitable for locations with limited space. IP68, corrosion-resistant, suitable for harsh industrial environments
Range: ±80g Sensitivity: 100mv/g Temperature Measurement Range: -40℃～+120℃ Built-in IEPE circuit, isolated output, constant current source power supply 
光伏
风电
数据中心
电信设备
港口
楼宇
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
Leewell Intelligence’s Joint Research Project Wins Special Award at National Equipment Management and Technological Innovation Achievements ——14 Years of Independent R&D Delivers “Chinese Solutions” for Global Smart Port Development
利维智能联合攻关项目荣获全国设备管理与技术创新成果特等奖 ——十四年坚持自主研发，为智慧港口建设提供"中国方案"
Leewell displayed core solutions such as vibration-temperature monitoring, stress monitoring, and wire rope visual monitoring for on-site customers at TOC Europe 2025, gaining a lot of attention.
2025年6月19日，第七届中国现代煤化工装备智能化与低碳化发展大会在宁夏银川启幕。本次大会以“数据驱动·绿色转型，构建现代煤化工高质量发展新格局”为主题，吸引了来自全国各地的行业专家、企业代表及技术供应商齐聚一堂，共同探讨煤化工行业智能化与低碳化的前沿趋势。作为智能运维解决方案的标杆企业，利维智能（深圳）有限公司（以下简称“利维智能”）受邀参展，以“万物互联，智慧矿山”为主题，携其煤炭
2025年6月17日—19日，全球领先的港口与航运盛会——TOC展会在荷兰鹿特丹隆重举行。作为工业物联网领域的佼佼者，利维智能再次亮相此次盛会，携其创新的智能运维解决方案成为展会焦点。凭借在港口行业的深厚积累与技术优势，利维智能为现场客户展示了振温监测、应力监测及钢丝绳视觉AI监测等核心产品，助力港口企业实现降本增效、延长设备寿命、减少安全隐患，吸引了众多行业客户的关注，利维智能专家团队为观众
Leewell Intelligence (Shenzhen) Co., Ltd., in collaboration with Qingdao New Qianwan Container Terminal Co., Ltd. (QQCTN), has been awarded the First Prize in the 2024 Science and Technology Awards by the China Ports & Harbours Association (CPHA). The joint project, "Research and Application of Full Autonomous Key Technologies for Automated RMG," stood out fr
2025年4月，中国港口协会正式揭晓2024年度科学技术奖榜单，利维智能（深圳）有限公司与青岛新前湾集装箱码头有限责任公司联合攻关的“自动化轨道吊全自主关键技术研究与应用”项目，从全国百余个参评项目中强势突围，荣获科学技术一等奖。该项目围绕AI人工智能技术展开，通过创新性技术突破与产业化落地，为港口自动化升级树立了新标杆。
为深入解读《民营经济促进法》政策内涵，促进民营企业高质量发展，5月23日，由利维智能（深圳）有限公司、广东高科技产业商会共同主办的走进利维参访暨《民营经济促进法》解读交流会在利维智能总部成功举办。本次活动汇聚了商会领导、企业代表及行业专家，共同探讨民营经济发展新机遇。
匠心筑梦 创新致远 利维智能2025年会盛典精彩回顾，共启新征程
Invitation from Zhejiang Seaport Group to Provide Professional Training for Terminal Technicians
2024年11月23日及30日，应浙江省海港集团诚挚邀请，利维智能为码头技术人员提供两场专业培训
利维智能参编国家标准《工业互联网平台监测分析指南》，助推行业标准化建设
On July 11, 2024, the first commercial vessel, Maersk San Fernando, officially started operation at Adani Group's automated terminal in Vijinjam, India. Leewell Intelligence provided the intelligent sensing system for 8 QCs and 24 RMGCs at the terminal, and built a group-wide equipment management platform for the Group. It not only symbolizes the successful opening of a new era of commercial operation for India's first automated terminal, but also fully demonstrates our company's strength in providing a full range of intelligent monitoring solutions in the field of automated terminals.
2024年7月11日，印度Adani集团维津詹姆自动化码头迎来首艘商业船舶——马士基圣费尔南多号（Maersk San Fernando）的正式作业，利维智能为该码头8台岸桥、24台双悬臂轨道吊设备提供智能监测系统并为印度Adani集团构建了全集团的设备管理系统。这不仅象征着印度首个自动化码头成功开启商业运营的新纪元，也充分展示了利维智能在自动化码头领域提供全方位、一站式智能监测方案的实力。
Leewell, as a provider of intelligent operation and maintenance solutions, participated in this exhibition to help the green and intelligent development of the port and logistics industry, gaining a lot of attention.
2024年6月11日至13日，2024年港口集装箱供应链展览会TOC Europe在荷兰鹿特丹Ahoy中心举行，此次展会汇聚了全球各地港口物流专家、技术从业者和行业相关人士。利维智能作为智能运维解决方案提供商亮相本次展会，助力港口物流绿色化、智能化发展，收获了大量关注。
利维智能，乘龙而上，开启新征程！
1月20日-22日，利维智能的全体员工共聚泉州，感受闽南的风土人情和文化魅力。
From September 7 to 8, 2023, 2023 Tencent Global Digital Ecosystem Summit was held in Shenzhen International Convention and Exhibition Center. As an industrial partner of Tencent, Leewell was invited to attend the conference, jointly helping the digitalization and intellectualization development of thousands of industries. In the afternoon, T
2023年9月7日-8日，2023年腾讯全球数字生态大会在深圳国际会展中心召开，利维智能作为腾讯的产业合作伙伴，受邀出席了本次大会，共同为数实融合，千行百业的数字化、智能化、智慧化发展助力。下午腾讯产业合作伙伴峰会以“行稳致远，共创繁荣新生态”为主题，共同探讨产业生态合作的新机会，并通过产业互联网的战略声音、重点行业实践的深度解析、未来趋势的洞察洞悉，合作伙伴间实现共生共享共赢。此外，腾讯面
光伏
风电
数据中心
电信设备
港口
楼宇
热线：
